What PCB thickness is optimal? The USB-C tongue on a shieldless part I use is ~0.7mm, which is a pretty thin PCB.
webdevver•1h ago
i wonder how often you can plug/replug the connector in this case. how will the pcb material hold up? with my press-fit or clip-fit (is that a term?) 3d prints, ive noticed that 20 cycles can be sufficient to induce substantial 'loosening'.
ggm-at-algebras•58m ago
Plug an OTG cable in and connect to that, so you don't repeat plug-unplug?
eternityforest•1m ago
What about the force transferred by the connector wiggling? I think You'd need a very good mechanical design on the case to make it all work.
That is a very thin PCB. For anyone reading this, 1.6mm is standard.
peteforde•1h ago
In a similar vein, I discovered and have started using the Tag-Connect TC2030-USB to program/troubleshoot my boards. While it's technically/originally intended as a way to do JTAG debugging, I am completely enamored with the ability to drop a footprint on my PCB and be able to connect to it without having to place a relatively expensive connector (or a connector at all) that I don't necessarily want users interacting with.
They have FTDI versions as well, for those who want the full USB boot/reset treatment.
Also, they have another connector for attaching to castellated edges. I think it's just so clever.
Brian_K_White•52m ago
I just use ordinary straight pin headers and stagered via holes. The board just has vias and the cable just has a plain pin header not even pogo pins.
wrs•38m ago
I've been doing a cheap DIY version of Tag-Connect for some STM32 projects (6-pin debug). I just put the holes for a pin header near the edge of the board, and use a pogo clip to connect [0]. (These are readily available on AliExpress in various sizes.)
Same, enamored and I’m not even the EE. Elegant, no cost on the product side, and I don’t have to take the board out of the case to access it.
JKCalhoun•57m ago
That's cool but I am not sure how a customer of mine would feel if I shipped a board to them like that. (I could see trying it on a project for myself, though.)
15155•1h ago
webdevver•1h ago
ggm-at-algebras•58m ago
eternityforest•1m ago
Taniwha•1h ago
https://x.com/AnasYMalas/status/1982060711670067350
Taniwha•1h ago
peteforde•1h ago