Hey HN, I have built a game server orchestrator from scratch, As a solo-dev it took me 3+ years and almost 10 hours daily to finally complete it since i started in the beginning of 2023. Im 26 years old now!.

The complexity and stuff i had to research to complete this project i couldnt have imagined them even in my dreams, but hey, here it is, my greatest professional achievement until now.

Down below I will try to break down just some of the core and most important features of my game server orchestrator.

1. CORE PINNING & CCD CACHE ALIGNMENT

I had to research and understand CPU cache layouts. I found out that if my game containers, which utilize docker run, span across different core complex dies (CCDs) or share SMT sibling threads with a busy neighbor, L3 cache thrashing ruins single-core tick efficiency.

Then what I did is that I pinned all non game-server processes strictly on core 0 and its SMT sibling core 12 using GRUB:

I disabled the 1000Hz timer interrupts to prevent context switching so as to not pollute the L3 cache.

I also offloaded the rcu to cores 0 and 12 so as to avoid any micro interruptions on the game containers and leave 100% of the performance to the game containers.

  GRUB_CMDLINE_LINUX_DEFAULT="nomodeset isolcpus=1-11,13-23 nohz_full=1-11,13-23 rcu_nocbs=1-11,13-23"

As for the game containers, as i mentioned i utilize docker run directly since swarm is not needed and would actually be bad design, I have the orchestrator service which utilizes and algorithm to calculate which CCD core is best to pin the game server container on:

  // Zen 4 core complex die (CCD) mapping in C#
  int siblingOffset = totalHardwareThreads / 2;
  int coresPerCcd = siblingOffset / 2;
  int getCcdId(int i) => ((i % siblingOffset) < coresPerCcd) ? 0 : 1;
  int getSibling(int i) => (i < siblingOffset) ? (i + siblingOffset) : (i - siblingOffset);

I also set the memory limit and the memory reservation to be equal (--memory == --memory-reservation), in order to make the kernel lock that RAM memory physically RAM and block swap usage to avoid the noisy-neighbour problem.

Since, as can be seen, the orchestrator tries to find the most performant threads for a game server, this means that the host node will get its cpu fragmented, specifically for this case I have an algorithm that simulates on the host node the best place for each running game container then relocates some or all of the container dynamically, live, without restarting the container or disconnecting any active player using:

  docker update --cpuset-cpus="{cpuSet}" {containerName}

2. EBPF/XDP + NFTABLES utilization for preventing ddos attacks, since game servers get constantly bombarded by ddos attacks, bots or otherwise specially targeted for many different reasons, could be whats called a script kid or sometimes even salty gamers, xd.

In the beginning i tried to use UFW but ended up get rid of it since it conflicts with docker, which it took me quite some time to realize it in the beginning since i was still doing research on how things work on the network-level.

In order to have the best protection I decided to have specific, per port connection rate limits. If the limits are hit I use a blacklist which the offenders ip is registered on, with a specific timer, then immediately register those blacklisted ips on the eBPF map. These IPs are dynamically added and removed from each list/map when the ban expires.

There is AnonymousPipeClientStream edge case though, a lot of games have many different mods and plugins which can increase the rate of packets, even though I have tried my best to account for this in the default rate limit rules I have set, also allow the game server owners to actually adjust these limits if needed, cloudflare-style, by providing 4 profiles: Standard, Loose, Strict, UnderAttack.

have optimized the standard one as best as I could, based on real life data, and it should be enough for 99% of the servers, the other profiles could be utilized in other rare cases for heavily modded servers for example.

So the best approach for ddos mitigation is using nftables with per game server port limits have per game port nftables limits which

I have also bumped the rmem_max/wmem_max buffers to 16MB so that specific game-container threads dont block when registering the map data directly into ram, by default the write buffer is tiny around 200 KB, by doing this the player ticks are processed quicker.

Since the user needs to manage the game files, uploading/downloading/editing/deleting etc etc, I use fireqos to prioritize game traffic, meaning game traffic gets the fast-lane and is never throttled by the actions that the clients does using their file manager making sure that the game stays ping spike free.

I also use TCP BBR Congestion Control instead of the default Linux CUBIC which is unoptimized and causes rubber-banding because it assumes that if there is packet-loss between the game server and the player there must be network congestion which as a result reduces transmission speed, which in turn causes lag spikes. What BBR Congestion Control does is that it measures the actual bandwidth between the game server and the player and sends the data packets at a speed which the player can consume and as a result avoids rubber-banding.

I also use fq, fair queueing, in order to avoid a single game server owner from using all the bandwidth in case for example someone decides to upload or download huge files.

# BBR Congestion Control net.core.default_qdisc = fq net.ipv4.tcp_congestion_control = bbr

  # UDP/TCP Buffer Expansion
  net.core.rmem_max = 16777216
  net.core.wmem_max = 16777216
  net.core.rmem_default = 16777216
  net.core.wmem_default = 16777216

3. SSR CACHE POISON solution.

In order to avoid angular ssr cache poisoning i have two endpoints, /graphql - public and read-only data which are directly cached on cloudflare, this endpoint rejects immediately any auth header, by rejecting the entire request, in order to prevent cache-poisoning and prevent any state sharing between requests. The second endpoint is /secure handles any authenticated data and does not cache anything. Also all my web services, like the front end, api, database calls use my private wireguard mesh which adds a layer of security. Also during SSR in Node.js I have skipped the TLS handshakes entirely which adds a bit of latency by using the local Docker swarm network for direct access to my api.

-----

Since as I mentioned im a solo-dev, im bootstrapping this entirely out of my own pocket, I have two bare-metal nodes, one in Europe and the other on Central USA.

Today, my goal is to see how my orchestrator handles real world usage before i scale up, so I invite anyone to spin up a game server by using my free trials and try to break my system.

If anyone wishes, he can go directly on https://ray-hosting.com/en-US/free-trial and register to automatically claim the free trial. It requires a credit card though, solely for abuse protection. OR, if you dont want to put your card down which is understandable, i can spin up a trial for you from my admin panel directly after you register so that you can test my system's abilities, just drop a comment here since I will be watching the thread today. I would really love to hear honest thoughts and opinions on the architecture, deployment speed, or any other thing you want to discuss.

PS: im not a native english-speaker so I had a hard time putting this together, lol, btw, I do have a lot more stuff to talk about my platform but for now this drained me. Lol, thank you very much for reading.

The Leading Deepfake Expert No Longer Trusts His Own Eyes

How Are You Feelin.today?

Show HN: Ray Hosting – Topology-aware game server orchestrator made from scratch

Why All the PRs?

Bring Siri AI to EU iPhone Users Safely

The Fertile Void

Companies are scrambling to curtail soaring AI costs

UK to announce Australia-style social media ban for teenagers

The Aeneid by Virgil (19B.C.E)

Show HN: Pg-status – lightweight HTTP sidecar for PG master/replica discovery

Claude Code Is Dead

Webxdc – Secure mini apps for chats

Paul Krugman breaks down problems with SpaceX valuation [video]

Is Musk the richest American ever now? No, except as a consumer

CoreAI_HTCE

From AGI to ASI

Pilot and 11 skydiving passengers killed in Missouri plane crash

How to Build a Phyle

What does high effort mean when AI has made everything low effort?

I built a free tool that tells you if an LLM will run on your GPU

Leave It to Beaver: Everything is bigger at Buc-ee's

Virology Research Is Not a Crime

Abandoned and Little-Known Airfields

2026 Global Peace Index [pdf]

KPMG report on AI found riddled with AI hallucinations

Compute 'S Atari ST Reference Books – By Paul Lefebvre

Ask HN: I am a junior CS and math major. I have no hope for SWE or math. Advice?

Seer – an Ollama workspace where two models build and review code

Show HN: I hate typing continue once my CC quota resets

Frona v2026.6.0 – self-hosted personal AI assistant

Show HN: Philosophy for Kids

Comments