The current FPGA manufacturers won't disclose the details of the design internals to "protect their intellectual property".
Only small FPGAs have been reverse engineered and there are some high-quality tools that have been developed. Their limitation is information.
Because of high costs set by the big players the ability to build truly complex FPGA designs (e.g. an NVIDIA competitor or an ARM competitor or a high-function inference chip) is "closed source information" limited.
But by design FPGAs are basicaly simple repeated elements that can be scaled to any size. That means that a new open sourced chip could be a range from really tiny to enormous with cost purely a function of chip die area. This makes it a pure commodity play.
Some "bright spot" student wanting to start a company could get funded to create a new FPGA design (e.g. since wires take up most of the area figure out how to put the wires "under the logic" in a multi-layer design). Extend existing open-source software tools chains for the new chip design. Open-source the design and license it which is what made ARM so big.
Within hours I'm certain the FPGA tools would be updated to full support of the new chip, opening the market to real, high powered chips. Or create your own open-source tools. Build the company around selling expertise like consulting on custom board-level designs using the new chips.
Turning highly capable FPGAs into volume chips is a market nobody has addressed. What it needs is someone who wants to be a startup CEO and someone who has capital to create the first design (probably a few million dollars).
Of course if you have access to REAL capital then buy Xilinx or Altera and open source their design and tool chain. The company that doesn't get bought would disappear overnight. (Somebody call Musk with the idea :-) )
If you know someone who wants to "go big fast" either path is a major opportunity.
bigyabai•9h ago
daly•8h ago
A highly parallel, high speed, massive I/O device to run your robot that can be upgraded over the wire with new features? Nothing to see here. Nobody would want to improve a product like a car or a robot "over the wire".
A billion robots whose hardware gets better overnight? Nah. Pointless.
bigyabai•7h ago
Because, again, it's a real peachy idea to want everyone to have a superpowered FPGA computer. The reason your iPhone isn't an FPGA comes down to the fact that you'd need ~20x the die space to implement a basic AArch64 core, which would drive the costs to ~$10,000-$20,000 per-handset and reduce your battery life down to the half-hour territory. If you combined the yearly capacity of TSMC, Samsung, Micron, Intel and CXMT, there would not be enough silicon to make a million competitive FPGAs, let alone a billion.
So, explain it. Why would robotics or smart car manufacturers prefer a 150 watt FPGA that is slower and 10x more expensive than a 15 watt CUDA SOC? AI is not a panacea, it cannot make these FPGAs consume less power than an ASIC or take up less die space than a RISC processor.
daly•6h ago
Point 1: I am creating an FPGA in the robot hand that learns repetitive motion which will reduce the load on the main AI. The "Learned Hand" idea is based on the human ability to "get learning into the hand", for example, doing typing or playing piano. Notice that you don't have to think "adjust the fingers to play a C chord". A similar system would allow stable walking with no AI input, including fast recovery from tripping. It self-modifies (learns) over time.
Point 2: The phone ASIC makes sense because you have a very well specified, very engineered environment that will be replicated a billion times and will never require "over the air updates". Self-driving cars and robots will need to adapt to external environments, new sensors, etc. "over the air". If you replace a robot hand you'll only needs a few seconds of training to make it repeat precise motions of the previous hand. Each hand could be factory calibrated in the FPGA to a known-good standard.
Point 3: So you believe that Musk's Terafab won't be able to make a million FPGAs? By my calculation you could fit about 128k FPGAs on a 16 inch fab wafer. So we're talking a run of about 7 wafers per million FPGAs.
Point 4a: Economics: There are very large companies that create FPGAs so there is a known market. However the TAM (total addressible market) is much larger and being held back due to high cost of initial learning (a high end development board is several thousand dollars). Reducing this cost will greatly expand the market (look at Raspberry Pi for an example).
Point 4b: Economics: FPGA programming in Verilog is not hard to learn so anyone with a clever idea could build the circuits. Making it "nearly free" (under $100) would open the TAM. Rather than the artificial paywall the company makes money licensing the designs which is how ARM got rich. Another revenue path is consulting on board design.
Point 5: Fabrication: A low-cost large LUT chip costs nearly the same as a low-cost trivial LUT chip when factoring all of the costs. Since LUTs are replicated once designed adding more LUTs to the design is a minimal cost.
Point 6a: Design: The key issue in design comes down to timing and routing. The timing tree gets larger so clock skew becomes an issue. But this can be overcome in a large FPGA by arranging clock domains so processes can run on parallel clocks, in my case one per robot finger.
Point 6b: Design: Current FPGA designs use a lot of chip real estate with wires and switching. I suggested a novel design that would first layer the routing wires and then put the LUTs in a second layer. While this will make the design and fabrication more expensive it will shrink the chip (thus more per wafer) and improve the crossbar issues. Indeed, Intel has been creating a "back of wafer" power distribution. Something similar for wire routing would be a serious breakthrough. Or even better, use the new "gate all around" technology to create "a vertical LUT" with minimal space.
Point 7: Creativitiy: Musk is putting hardware in space. You could easily create replicated FPGAs and leave them unpowered. If an FPGA fails due to radiation you switch it off and use a dark hardware replacement. If the failure is "we found a faster algorithm" you can do "over the 'air'" updates.
Point 8: As Musk would say: this is only a matter of moving atoms and electrons. There is no physical reason this can't be done.
etc. Now that I've done my part perhaps you could refute it point-by-point?