ursa-ag.com For (a little bit) more info
We'll see what, if anything, actually becomes available.
https://www.thedrive.com/news/new-tractor-with-12-valve-cumm...
... and only briefly pause to wonder if it's because of all the anti-cookie, anti-tracking stuff in Safari.
I hit this first on my VPN, so I disconnected, then got asked again from my home wifi. I dunno why I look like a bot to Cloudflare. I hate these prompts and it’s too bad they’re all over the web.
This article requires Age Verification. Please hold up your passport to the sensor on your device to continue.
https://en.wikipedia.org/wiki/Glider_%28automobiles%29#Glide...
(Though these days I've love something electric. I don't need long run time, I'm not doing row crops. Just market gardening and property maintenance stuff. All the electric stuff I see out there is aiming up at the high end and for autonomy / "smart" tractor stuff which I don't care about.)
I wonder about a hybrid version of this though, maybe Edison motors should collab
> A UGV (Unmanned Ground Vehicle) is a robotic vehicle that operates on the ground without a human driver onboard.
as far as auto mation goes, thats how implements used to work. it was a tracter/thresher/combine. then a bale counter is slapped on then maybe row sighting or guidance, etc.
if your really snazzy, the implement is actually mapping the soil for moisture, or rough composistion and holding data to use in reformulating or notating your current cultural plans, i.e. supplemental spot feeding and irrigation.
actual agricultural needs, not just fluff.
However, the tech exists for a reason and is not inherently bad, the issue is the lock-in, the lack of choice and interoperability.
IMO, there is plenty of space for an OEM who can play nice with others, offer an open (and vibrant ecosystem), and keep users coming back by choice, not by lock-in.
If a tractor with a clean-burning, efficient $7500k engine could be purchased and were designed around the theory that, in 20 years or so, the owner could reasonably quickly replace the entire engine (with a first-party or aftermarket solution), would that be a good solution?
The common tech that has solved these problems nicely (IMO) is network transceivers: SFP and similar modules are built according to multi-source agreements. They contain all kinds of exotic tech, and they are not intended to be serviced at all, but (unless your switch or NIC has an utterly stupid lockout) you can pull it out and replace it with an equivalent part from a different vendor in seconds, and those parts can be unbelievably inexpensive considering what’s in them. (Single-mode bidirectional 1Gbps transceivers are $11 or less, retail, in qty 2. This is INSANE compared the the first time I lit up a 1Gbps SMF link. To be fair, this particular tech may require one to replace both ends if one fails, but if you can spare a second fiber, the fully IEEE-spec-compliant interoperable ones are even less expensive.)
There's lots of other electronics in most modern vehicles, but the public manufacturer rationales for electronic lockdowns almost always point back to emissions concerns because they're so defensible. How do you separate them?
Mandate common interfaces and open hardware. I shouldn't have to buy a $10k dongle to sniff codes. I certainly shouldn't have to buy a different one for each manufacturer.
I would have expected policy to be pragmatic here, with (relatively) relaxed emissions requirements, since an affordable and reliable food supply is in the national interest? Sounds like that's not the case
Two stroke engines are pretty terrible in terms of unburned hydrocarbons and are disgusting for local air quality, which is why I'm glad they're being phased out in many areas.
I'd expect these tractors with I6 diesel engines to run pretty efficiently. I'd bet that the CO2 emissions from tractors are tiny in comparison from the emissions from trucks, fertiliser, and transporting the food.
Not sure how much appetite there is for that but half price + 5 grand in off the shelf electronics seems like something margin sensitive farmers would do.
This needs to be solved at government level with right to repair laws and requirement for open standards instead of believing in magic of "free market".
Buuuuut, the cost of implementing that stuff hurts the competition way more, so Deere and friends don't really fight it.
They're trading absolute market size for stronger control over market share. Less people are going to buy their products at the margin if the products are made worse. But those that do will buy it from them, so more profit.
Any argument made without acknowledging this is purely in bad faith. The problem is not regulation that benefits OEMs. The problem is that you can simply purchase regulations that benefit you.
Farmers are just pissed they lose the ability to repair the vehicle easily or get stuck with monthly subscription because tractor company has changed the terms and you are praying they don't change it further.
These low-tech tractors could become a hot bed for open source experimentation. Nothing stopping someone from sticking a tablet on the dash. You could run GPS harvesting optimization software or some webthing locally. Could be cloud or clever DiY farmers could run their farm off a local instance on a small machine using a WiFi AP atop the barn or whatever.
This tractor will last 50 years (and maybe more). Your grandchildren will be able to still use it. That longevity is the primary reason farmers would be super interested in this.
Some jobs (like mucking a barn for example) don't require a high-tech tractor. Sometimes you just need a workhorse that you can trust will start, run and do the job. Every single time. I still see farmers running old minneapolis-moline tractors from 100 years ago!
Not sure they needed to go all the way to mechanical injection tho, this is just literally burning money away
I predict 6 months before John Deer gets the Alberta UCP on the line and gets a law passed that bans "unsafe tractors" (or the like)
The demand for older vehicles in certain segments is actually increasing
The new models have engines that are smaller turbos, that part is true — but they get >30% better fuel economy, and they output more power.
The reliability might become an issue down the road especially in hybrid engines but the data so far don’t seem to support your assertions. The one exception is maybe the Tundra 3.4L but that seems to still be ambiguous as to the root cause, and may just be mfg process error.
Heated seats and stearing wheel, yes please.
But yep what I want is a Saab 900 "cockpit" car -- everything can be focused on and manipulated (physically!) without my eyes leaving the road or my hand having to explore too much.
But, yeah, electric.
Modern diesel systems equipped with DPF tech (which consumes DEF, the fluid) require a regen cycle which is kinda like an oven cleaning itself - they get super hot and burn away particulate before they can be used again. Farmers are more frustrated by the system than the fluid. In fact, DEF is really just piss (urea) which is the same kind of product that they use for fertilizer. Although the prices for urea have skyrocketed recently so perhaps they truly do hate DEF too.
The awesome thing about these 'older' Cummins engines is yes they lack DEF systems and also have mechanical fuel injection. As is commonplace with diesel, there are no spark/glow plugs either. So ostensibly once you have the engine started, it requires zero electricity or computer systems to operate. The RPM of the engine dictates everything else mechanically through gearing. This is a big win for equipment that needs to "just work". Of course they still have sensors and all kinds of systems that are kinda layered on top... but they're not strictly required. This is also why the "runaway diesel" problem exists. You cannot stop an engine like this without starving it of air or fuel.
The same engine has a little screw on the side, with a metal cover, that you absolutely should not remove and turn. Because if you did that, it would restore the horsepower of the engine back up to 35hp, which would be illegal.
Also, I know this is a strange parallel, but it feels similar to what Dell and HP did to their servers. They made the BIO so complicated that it takes 5-10 minutes for their severs to boot up. Using an older Dell server with a straightforward BIOS that boots up in 30 seconds feels awesome.
On top of this, I looked at Zero's job postings and they're desperately trying to hire a firmware lead to get the team to use Claude Code (precisely what I want managing a 100hp motor under my ass).
Not only are we in a world where everything is locked down with software, the software is about to get way worse and there's nothing you can do about it.
And there was no fancy technology in it at all. If I was in the forest and had forgotten the key, I'd just reach behind the dashboard and hot-wire it. The air filter was basically a shisha-pipe that bubbled the incoming air through wire wool and engine oil.
Its fuel gauge didn't work either. You just had to take a look in the tank, or quickly react as soon as the revs started dropped. I ran it dry a few times and had to sit there with a spanner in one hand and YouTube into the other, while trying to bleed all the fuel lines. But they were all on the outside of the vehicle, which made it comparatively easy I imagine.
I've never actually driven a modern tractor, so don't know how it compares. I imagine the clutch is easier on the knees these days!
Anyway, this just felt like the place to share this.
righthand•1h ago
9rx•1h ago
justonceokay•1h ago
Yes because thy live in the John Deere future. This was not always the case, surely. You used to be able to take high school classes to learn how to fix a combustion engine, even a new one!
saalweachter•51m ago
The economics of row-crop agriculture is "you gotta farm more land". That means spending as much time in the field as you can with as big a machine as you can.
So not only is time you spend fixing your tractor yourself time you're not spending on your primary job, it's also working on a machine that's just monstrously huge. Delegating that work to a specialist with specialized tools is a very reasonable way to live.
greedo•43m ago
saalweachter•35m ago
One of these days I'm going to buy one to restore, the way other men but the cars of their youth.
vablings•27m ago
saalweachter•12m ago
cucumber3732842•1h ago
Even if you have a service contract you're still gonna be pissed at the downtime cost of having a tech drag their ass out to wherever you are to initiate a forced regen or something.
wolttam•1h ago
9rx•52m ago
In fact, their TractorHouse profile shows that they are still struggling to sell last year's models. If there was demand, why hasn't that demand already gobbled up the stock? "I guess it would be cool to own one if it was given to me for free" isn't demand.
righthand•49m ago
greedo•41m ago
righthand•18m ago
saalweachter•7m ago
The other thing about tractors is that the three point hitches, PTOs, etc etc, have been standardized forever, so there's very little lock in in terms of, swap out your JD for and IH and away you go, so I'm curious if eg modern seed drills have any fancy tech which locks you in.
9rx•27m ago
It is not like John Deere actually has a monopoly. There is just as much CNH (CaseIH, New Holland) seen out in the fields, and even when you want all the bells and whistles, Fendt is rapidly becoming understood to be the true king of tech. What John Deere does have going for it is that they generally do better than everyone else at keeping parts in stock where the parts are needed; local to the farmer. Ironically, repairability is where John Deere finds the win at the end of the day.
sodapopcan•1h ago
huh, why not?
idiotsecant•24m ago