Could 'lb' be load balancer?!

Very cool. Over a year and a half ago I installed a towing brake controller in my Tesla Model Y. Found the location of the plug, how to access and the pinout online (confirmed via a voltmeter..) so the car's side felt straight forward. But then I needed to find a brake controller that can work with the higher voltage (14.4v vs the normal 12v). Then built a cable from the brake controller to the connector that plugs into the car that I found on eBay. I velcro'd the controller under the dashboard. It works pretty well. I towed my small camper several times with it last year with no issues. Yay! However my little project is nothing compared to this post. Love people hacking away. So cool.

I have no wheels and I must drift

Fun linguistic quirk: Americans tend to call it a "wiring harness", whereas Brits prefer "loom"

It's funny to hear LVDS be described as an "automotive" cable when all of my run-ins with it are for connecting laptop displays to their main-boards! (though that has a very different connector on it, and its a very general term for the signalling protocol from what I remember)

I love that it has a standard RJ45 ethernet connector.

> Turns out that actual cars don’t have individual cables. Instead they have these big “looms”, which bundle many cables from a nearby area into a single harness. This is the reason why I could not find the individual cable earlier. They simply don’t manufacture it.

I was really surprised to read this at the end of the article -- how could someone be this deep into a project of this depth and not realize this?! Not only because all cars (...er... all vehicles) are wired this way, but also because the documentation they were referencing has plenty of detail to show this... there's even a whole picture of it (and to Tesla's credit they have amazing free docs): https://service.tesla.com/docs/Model3/ServiceManual/2024/en-...

Granted, I think it would be valuable to look at all sorts of automotive ECUs. I always wonder how the tuning industry does their thing; I shudder to think they're just sitting there flipping hex codes directly in running software...

I used to work for a company that made third party scan tools. We had racks of ecus disconnected from the car with just a diagnostic connector and power. nothing got to a real car without first trying it on the rack. I remember on time we figured out a bmw (pre obdii) had the bytes offset from the standard documentation (it was a semi-standard protocol that some other cars used at the time), we went from we communicate but nothing is wrong to a very long list of dtcs on that controller. (All our competitors also showed nothing wrong, but the official bmw tool showed dtcs)

I'm amused reading the terms and requirements the author mentions in the bug bounty program for researchers gaining root access (under 'Vehicle Targets') - https://bugcrowd.com/engagements/tesla

"To promote further security research, Tesla offers security researchers the opportunity to retain root access on their infotainment system even after their reported vulnerability has been patched. In order to qualify, a researcher must send in a valid report describing a novel way to gain root access on a Tesla infotainment system. Upon confirmation, Tesla will instruct the researcher on how to use their existing root access to enable the researcher SSH feature, along with an SSH certificate for the researcher's public key (tailored to their specific hardware ID). The certificate restricts SSH access to the local diagnostic ethernet link. Tesla may renew the certificate as long as the researcher continues reporting vulnerabilities."

Very neat.

You can run QtCar (the Qt-based app that Tesla uses for their UIs) on QEMU - if you have the firmware.

https://x.com/i/status/1722717318009041104

DM me if interested

I _do_ find it weird that the LCDs from crashed cars are so expensive. I wonder if newer models have better screens, so people with older cars upgrade? Or if they're a common failure point?

I have a Model 3, but I can't say I follow the forums.. but I've never heard of screens failing -- I'm sure it happens but I think if it was common problem I'd have heard of it.

i wish the ui on those things was more visually appealing. between the cheap looking gloss finish on the display itself and the unextraordinary ui, it's just kinda blah. one can have a debate about to screen or not to screen or whether to use vfd displays or whatever and i get the importance of cost control but it should look good and it really doesn't. the graphic of the car looks like a cartoon.

[delayed]