... likely less than the ~$13/W this cost to install, but that included NRE for three different styles of panel mounting. Standardizing would cut costs significantly.

This is one reason I now live in Nevada, where pretty much everything is legal...

I would very much like to see a total dollar figure for the example "roof trusses over the canel" structure vs. how many panels it can hold.

It's already true that the ground mounting costs and labor to assemble the ground mount are a huge part of building a large scale PV system.

I seriously doubt that you can chain even 1/4 mile of panels together without destroying things. Thats already puting thousands of volts and hundreds or thousands of amps through the silicon. If you are making it all parallel you still need wiring between panels that can handle that. The cabling doesn't go away, it just moves.

Wouldn't there still be supports in a feild of solar panels? Are you sure that those supports + the supports for the shade material are going to be less material than the supports for this?

Most shade material wears out pretty quickly. Will their replacement result in more expense, more waste, etc than just putting the solar panels?

Shade material is generally pretty heavy, is it really going to need significantly less robust support? Weight aside, how much of the load those supports are rated for is due to the actual weight of the panels, and how much is for forces from things like wind?

Nothing short of a face-to-face security response will deter these criminals, so there it is a challenging cost-benefit balance. At least panels in parking lots and other developed spaces have the benefit of witnesses. I'm sure a 20 foot climb up a steel beam over running water is a decent deterrent as well.

No because now you're using land that could be used for other things, which is exactly what this avoids. This takes existing land that loses water and costs money, and makes it lose less water and make money.

> > The duo went on to start Solar Aquagrid, an advocacy firm dedicated to reimagining aging canals, and partnered with the Turlock Irrigation District, UC Merced and the California Department of Water Resources to cover small sections of Turlock’s canals with solar panels. The new “solar canal” provides shade to limit evaporation and generates power all in one neat package. They call it Project Nexus, and it operates at the intersection of the state’s need for clean water and energy.

> ...

> But the canal site hosts more than just panels. Bales said they “have instruments out there to measure temperature, relative humidity, wind speed, incoming radiation, outgoing radiation, and a prototype instrument to measure evaporation directly.”

> When it comes to algae, the panels helped. “Last year when we drained the canal at the end of the irrigation season, there was a physical line on the sun side of the canal that had algae growth and then not algae growth from where the shade was,” Weimer said.

That it's green energy and can help supply the power demand is a bonus.

While I agree those steel supports are large, that seems insanely wrong to me, but not an expert so curious if someone with more info could comment.

https://www.youtube.com/watch?v=x-RGL15Skuo